Aluminium and magnesium based alloys for welding
Alloys based on Aluminium and Magnesium suitable for the TIG/MIG techniques.
Used to join aluminium and magnesium based metals
Some alloys are also suitable for the Brazing technique.
Table and main features
| Code | Composition % | Standard | Description | |||||||||||
| al | si | mg | mn | zn | zr | DIN 1732 | AWS A5.10 | |||||||
| Al99,8 | Bal | 0,2 | 0,02 | 0,02 | - | - | SG-Al99,8 | 1080 | ||||||
| Al99,5 | Bal | 0,3 | 0,03 | 0,03 | - | - | SG-Al99,5 | 1050 |
|
|||||
| Code | Composition % | Standard | Description | |||||||||||
| al | si | mg | mn | zn | zr | DIN 1732 | AWS A5.10 | |||||||
| AlSi5 | Bal | 5 | 0,05 | 0,05 | - | - | SG-AlSi5 | 4043 |
|
|||||
| AlSi12 | Bal | 12 | 0,05 | 0,15 | - | - | SG-AlSi12 | 4047 |
|
|||||
| Code | Composition % | Standard | Description | |||||||||||
| al | si | mg | mn | zn | zr | DIN 1732 | AWS A5.10 | |||||||
| AlMg4,5Mn | Bal | 0,2 | 4,5 | 0,5-1 | - | - | SG-AlMg4,5Mn | 5183 |
|
|||||
| AlMg4,5MnZr | Bal | <0,4 | 4,5-5,2 | 0,7-1,1 | <0,25 | 0,1-0,2 | SG-AlMg4,5MnZr | 5087 | ||||||
| AlMg5 | Bal | 0,2 | 5 | 0,05-2 | - | - | SG-AlMg5 | 5356 | ||||||
| AlMg5Mn | Bal | 0,3 | 5 | 0,6-1 | - | - | SG-AlMg5 | 5556 | ||||||
| AlMg3 | Bal | 0,4 | 3 | 0,5 | - | - | SG-AlMg3 | 5754 | ||||||
| Code | Composition % | Description | ||||||||||||
| al | si | mg | mn | zn | zr | |||||||||
| MgAl6Zn | 6 | - | Bal | - | 1 | - | AZ61A (AWS A5.19) | |||||||
| MgAl9Zn | 9 | - | Bal | - | 2 | - | AZ92A (AWS A5.19) | |||||||
MAKE-UPS
rods
wires
flux-cored rods and wires
rings
Do you have a specific request?
Contact us for more information about our products, to ask for technical support or to receive a non-binding quotation.
NOT ONLY BRAZING: OUR CONSUMABLES FOR WELDING
In addition to brazing consumables, we offer a wide selection of high quality welding alloys. Therefore, we are able to meet any different need of manufacturers and resellers.